Workshop Repair Manuals

Plymouth Workshop Manuals

[PREV PAGE] [NEXT PAGE]

plymouth Workshop Repair Guides


PB 150 V8-318 5.2L VIN T 2-BBL (1983)

Powertrain Management > Fuel Delivery and Air Induction > Fuel Reservoir > Component Information > Technical Service Bulletins > Customer Interest for Fuel Reservoir: > 181985A > Dec > 85 > Fuel System - Vapor Lock > Page 2010

Page 3
background image

4.

Route and secure the engine overlay harness, PN 4362295, along the existing main engine wiring harness using the existing wiring clips and
two tie wraps, PN 6015756 (Figure 1-B).

FIGURE 1C - ENGINE COMPARTMENT WIRING

5.

Route and secure the engine overlay harness, PN 4362295, along the existing headlamp-to-dash main engine wiring harness to the bulkhead
connector using the existing wiring clips and three tie wraps, PN 6015756 (Figure 1-C). Loop and tape any excess wire of the engine overlay
harness.

FIGURE 1D - TERMINAL END OF BULKHEAD CONNECTOR (ENGINE COMPARTMENT SIDE)

6.

Coat the bare blade terminal of the engine overlay harness, PN 4362295, liberally with Mopar multi-purpose grease PN 4318063, and snap
into cavity #14 of the engine side of the bulkhead connector (Figure 1-D).

B.Instrument Panel Harnesses Pn 4362289, All Models

Powertrain Management > Fuel Delivery and Air Induction > Fuel Reservoir > Component Information > Technical Service Bulletins > Customer Interest for Fuel Reservoir: > 181985A > Dec > 85 > Fuel System - Vapor Lock > Page 2010

[PREV PAGE] [NEXT PAGE]