Workshop Repair Manuals

Plymouth Workshop Manuals

[PREV PAGE] [NEXT PAGE]

plymouth Workshop Repair Guides


PB 150 V8-318 5.2L VIN T 2-BBL (1983)

Powertrain Management > Relays and Modules - Powertrain Management > Relays and Modules - Computers and Control Systems > Powertrain Control Module <--> [Engine Control Module] > Component Information > Technical Service Bulletins > Customer Interest for Powertrain Control Module: > 181985A > Dec > 85 > Fuel System - Vapor Lock > Page 1020

Page 10
background image

FIGURE 3A - BODY WIRING

FIGURE 3B - BODY WIRING

Install red mold of body harness, PN 4362293, onto red stud of gauge/pump unit. Install yellow mold of harness, PN 4362293,
onto black stud of gauge/pump unit (figure 3-a or 3-b).
Install molded blade terminal of harness, PN 4362293, onto blade terminal of 22 gallon gauge unit only.

NOTE:

PREVIOUS GAUGE UNIT GROUND WILL NOT BE USED ON 22 GALLON GAUGE/PUMP UNIT. ON
36 GALLON GAUGE PUMP UNIT, THE GROUND WIRE ON HARNESS PN 4362293 WILL NOT BE
USED.

CAUTION:

INCORRECT WIRING CONNECTIONS WILL CAUSE THE FUEL LEVEL GAUGE UNIT AND/OR
CLUSTER GAUGE TO FAIL AND THE ELECTRIC PUMP TO BE INOPERATIVE.

Set aside the rest of harness, PN 4362293, to assure wiring is not pinched when reinstalling fuel tank.

4.

Reinstall fuel tank to original position.

D.Body Wiring Harness Pn 4362293

Powertrain Management > Relays and Modules - Powertrain Management > Relays and Modules - Computers and Control Systems > Powertrain Control Module <--> [Engine Control Module] > Component Information > Technical Service Bulletins > Customer Interest for Powertrain Control Module: > 181985A > Dec > 85 > Fuel System - Vapor Lock > Page 1020

[PREV PAGE] [NEXT PAGE]