Plymouth Workshop Manuals
PB 150 V8-318 5.2L VIN T 2-BBL (1983)
Sensors and Switches > Sensors and Switches - Instrument Panel > Fuel Gauge Sender > Component Information > Technical Service Bulletins > Customer Interest for Fuel Gauge Sender: > 181985A > Dec > 85 > Fuel System - Vapor Lock > Page 275
FIGURE 2D - INSTRUMENT PANEL WIRING
Route instrument panel jumper harness, PN 4362291, from the back of the brake bracket to the existing 3-way red molded connector.
Insert the bare bullet terminal (black with white tracer wire) from instrument panel jumper harness, PN 4362291, into the existing
Mate the orange colored 1-way connector from instrument panel jumper harness, PN 4362291, to the orange colored 1-way connector
Reinstall instrument panel hood and bezel assembly and install radio.
FIGURE 2F - INSTRUMENT PANEL WIRING
With Auxiliary Air Conditioning and/or Heater and Power Windows - Jumper Harness PN 4362292
Disconnect from each other, the two existing brown colored 1-way connectors located near the left instrument panel vent (Figure 2-F).
Reconnect these two brown colored 1-way connectors to the two brown colored 1-way connectors from instrument panel jumper
Mate the orange colored 1-way connector from the instrument panel jumper harness, PN 4362292, to the orange colored 1-way
|[PREV PAGE] [NEXT PAGE]|