PB 150 V8-318 5.2L VIN T 2-BBL (1983)
FIGURE 2 - NEW STYLE
Remove valve body and inspect the lock-up valve body.
If lock-up valve body is the old style lock-up body (Figure 1), replace it with new style Lock-Up Body (Figure 2) PN 4202209 and replace
the present lock-up spring with a new Lock-Up Spring PN 4202672. Reuse the existing lock-up valve, fail safe valve and spring, cover, and
If the lock-up valve body is the new style lock-up body (Figure 2), install only the new Lock-Up Spring PN 4202672.
Install the valve body and torque screws to 35 inch pounds (4 N-m).
Install the transmission oil pan and fill with ATF fluid.
Adjust shift and throttle linkage as necessary.
THIS BULLETIN IS RELEASED IN ADVANCE OF PARTS AVAILABILITY. THE PARTS LISTED IN THIS BULLETIN
WILL BE AVAILABLE IN LATE FEBRUARY, 1983.
Reimbursable within the provisions of the warranty
Labor Operation No.
21-95-01-90 . . . . . . . . . . 1.1 Hrs.
30 - Surge