Prowler V6-3.5L VIN G (1999)
Body Control Module: Symptom Related Diagnostic Procedures
NAME OF CODE
Door Lock Switch Failure
Any time battery voltage is above 10.0 volts and the BCM is awake.
The BCM senses a voltage on the door lock switch output (lock) circuit for longer than 4 seconds.
THEORY OF OPERATION
The BCM interfaces with the power door lock switch. Each switch when activated will send a 12 volt signal to the BCM. The BCM will monitor
the switch for a stuck condition (active for more than 4 seconds) and set this code.
Door lock switch output (lock) circuit shorted to voltage
Switch held in lock position too long.