Prowler V6-3.5L VIN G (1999)
Compressing Timing Belt Tensioner
CAUTION: Compress the tensioner slowly, as damage to tensioner could result.
5. Place the tensioner into a vise and SLOWLY compress the plunger into the tensioner. Total bleed down of tensioner should take about 5 minutes.
NOTE: Index the tensioner in the vise the same way it is installed on the engine. This is to ensure proper pin orientation when tensioner is
installed on the engine.
6. Install pin through the tensioner body and plunger to retain plunger in place until tensioner is installed.
NOTE: When the tensioner is removed from the engine, always store with the plunger pointing upward.
Camshaft Sprocket Timing Marks
7. Install camshaft sprockets onto the camshafts. Install NEW sprocket attaching bolts into place. The 255 mm (10 inch) bolt is to be installed in the
left camshaft and the 213 mm (8 3/8 inch) bolt is to be installed into the right camshaft. Do not tighten the bolts. Camshaft sprocket mark should
be positioned between the marks on the inner cover.
