Workshop Repair Manuals

Plymouth Workshop Manuals

[PREV PAGE] [NEXT PAGE]

plymouth Workshop Repair Guides


Prowler V6-3.5L VIN G (1999)

Heating and Air Conditioning > Control Assembly, HVAC > Component Information > Testing and Inspection > Page 4486

Page 1
background image

Control Assembly: Service and Repair

Fig 37  Center Bezel

REMOVAL

1. Pull center bezel straight rearward along the sides of the radio and A/C control openings to disengage four clips and disconnect the power outlet

wire connector.

Fig 38  HVAC Control Removal

2. Remove the HVAC control attaching screws. Pull the control out to disconnect two electrical connectors and two control cables.
3. Remove HVAC control.

INSTALLATION

For installation, reverse the above procedures.

-

Verify that the cables are properly adjusted and the module is seated properly.

Heating and Air Conditioning > Control Assembly, HVAC > Component Information > Testing and Inspection > Page 4486

[PREV PAGE] [NEXT PAGE]