Workshop Repair Manuals

Plymouth Workshop Manuals

[PREV PAGE] [NEXT PAGE]

plymouth Workshop Repair Guides


Prowler V6-3.5L VIN G (1999)

Lighting and Horns > Tail Lamp > Tail Light Bulb > Component Information > Service and Repair

Page 1
background image

Tail Light Bulb: Service and Repair

REMOVAL

Access Door

1. Remove screws attaching the tail/stop/turn signal lamp access door to the body.
2. Remove access door.
3. Rotate bulb socket counterclockwise one quarter turn.

Headlamp Bulb Access Cover Screws

4. Pull bulb socket from the tail/stop/side marker/ turn signal lamp.
5. Pull bulb from the bulb socket.

INSTALLATION

1. Push bulb into the bulb socket.
2. Push bulb socket into back of tail/stop/turn signal lamp.
3. Rotate bulb socket clockwise one quarter turn.
4. Position the lamp access door on the body.
5. Install screws attaching lamp access door to the body
6. Verify proper operation.

Lighting and Horns > Tail Lamp > Tail Light Bulb > Component Information > Service and Repair

[PREV PAGE] [NEXT PAGE]