Prowler V6-3.5L VIN G (1999)
Turn Signal Bulb: Service and Repair
Park and Turn Signal Lamp Bulb
REMOVAL
Park And Turn Signal Lamp Bulb
1. Remove screws holding park and turn signal lamp to bumper.
2. Separate park and turn signal lamp from bumper.
3. Rotate bulb socket counterclockwise one quarter turn.
4. Pull bulb socket from back of lamp.
5. Pull bulb from bulb socket.
INSTALLATION
1. Push bulb into bulb socket.
2. Position bulb socket into back of tile park and turn signal lamp.
3. Rotate bulb socket clockwise one quarter turn.
4. Position park and turn signal lamp into opening of bumper.
5. Install screws to hold park and turn lamp to bumper.