Plymouth Workshop Manuals
Prowler V6-3.5L VIN G (1999)
Maintenance > Wheels and Tires > Tire Monitoring System > Low Tire Pressure Indicator > Component Information > Diagrams > Diagram Information and Instructions > Page 1028
Jumper harness connectors are C400 series numbers.
Grounds and ground connectors are identified with a "G" and follow the same series numbering as the in-line connector.
Component connectors are identified by the component name instead of a number.
Multiple connectors on a component use a C1, C2, etc. identifier.
Electrostatic Discharge (ESD) Sensitive Devices
Electrostatic Discharge Symbol
All Electrostatic Discharge (ESD) sensitive components are solid state and a symbol is used to indicate this. When handling any component with this
1. Always touch a known good ground before handling the part. This should be repeated while handling the part, especially after sliding across a seat,
sitting down from a standing position, or walking a distance.
2. Avoid touching electrical terminals of the part, unless instructed to do so by a written procedure.
|[PREV PAGE] [NEXT PAGE]|