Plymouth Workshop Manuals
Prowler V6-3.5L VIN G (1999)
Powertrain Management > Computers and Control Systems > Transmission Position Switch/Sensor, A/T > Component Information > Technical Service Bulletins > Transmission Range Sensor - Production Change > Page 2511
The above information will help technicians and parts personnel select the proper parts when working with these different combinations.
THE EASIEST WAY TO DETERMINE WHICH COMPONENTS ARE REQUIRED IS BY LOOKING AT THE TERMINAL STYLE OF THE
1998 AND 1999 TRS ARE NOT INTERCHANGEABLE. THERE IS A DIFFERENCE IN THEIR SIZE (THROUGH CASE DIAMETER).
The following guidelines will help determine which components are required when making related repairs:
1999 Vehicle Needs A TRS Or Valve Body Assembly
Inspect the TRS for terminal type.
If the TRS has PIN terminals, order a 1998 TRS or Valve Body assembly for service.
If the TRS has BLADE terminals, order a 1999 TRS or Valve Body assembly for service.
1999 Vehicle Needs A Transaxle
Regardless of original transaxle type (1998 or 1999) a 1999 transaxle should be ordered for a 1999 vehicle.
IF THE 1999 VEHICLE HAD A CARRYOVER 1998 TRANSAXLE, THE HARNESS JUMPER MUST BE REMOVED SO THE VEHICLE
1998 Or Earlier Vehicle Needs A TRS Or Valve Body Assembly
Order 1998 components for the transaxle.
1998 Or Earlier Vehicle Needs A Transaxle
If the applicable model year transaxle is ordered and received, no further action is required.
If a 1999 model transaxle is received for a 1998 or earlier vehicle, a TRS harness splice kit p/n 5014473AA 41TE or 5014474AA 42LE must be
|[PREV PAGE] [NEXT PAGE]|