Plymouth Workshop Manuals
Prowler V6-3.5L VIN G (1999)
Powertrain Management > Fuel Delivery and Air Induction > Relays and Modules - Fuel Delivery and Air Induction > Fuel Pump Relay > Component Information > Locations > Page 2797
WARNING: DO NOT ALLOW OHMMETER TO CONTACT TERMINALS 85 OR 86 DURING THIS TEST.
7. Attach the other end of the jumper wire to relay terminal 86. This activates the relay. The ohmmeter should now show continuity between relay
terminals 87 and 30. The ohmmeter should not show continuity between relay terminals 87A and 30.
8. Disconnect jumper wires.
ASD and fuel pump relay circuits.
|[PREV PAGE] [NEXT PAGE]|