Plymouth Workshop Manuals
Prowler V6-3.5L VIN G (1999)
Powertrain Management > Sensors and Switches - Powertrain Management > Sensors and Switches - Ignition System > Knock Sensor > Component Information > Specifications > Page 1950
Knock Sensor: Testing and Inspection
The engine knock sensor is affected by a number of factors. A few of these are: ignition timing, cylinder pressure, fuel octane, etc. The knock sensor
The knock sensor can be tested with a digital voltmeter. The RMS voltage starts at about 20mVac (at about 700 rpm) and increases to approximately
If the output falls outside of this range a DTC will be set.
|[PREV PAGE] [NEXT PAGE]|