Workshop Repair Manuals

Plymouth Workshop Manuals

[PREV PAGE] [NEXT PAGE]

plymouth Workshop Repair Guides


Prowler V6-3.5L VIN G (1999)

Sensors and Switches > Sensors and Switches - Cruise Control > Brake Switch (Cruise Control) > Component Information > Description and Operation > Page 296

Page 1
background image

Brake Switch (Cruise Control): Testing and Inspection

Fig. 21 Stop Lamp Switch

1. Remove the stop lamp switch, refer to Lighting and Horns/Brake Light Switch/Stop Switch Removal/Installation. Disconnect connector from stop

lamp switch. Using an ohmmeter, switch continuity may be checked as follows:

2. With switch plunger released, there should be continuity between Pin 5 and Pin 6.
3. With switch plunger depressed, there should be continuity:

-

Between Pin 1 and Pin 2.

-

Between Pin 3 and Pin 4.

4. If the above results are not obtained, the stop lamp switch is defective or out of adjustment.

Sensors and Switches > Sensors and Switches - Cruise Control > Brake Switch (Cruise Control) > Component Information > Description and Operation > Page 296

[PREV PAGE] [NEXT PAGE]