Plymouth Workshop Manuals
Prowler V6-3.5L VIN G (1999)
Sensors and Switches > Sensors and Switches - Lighting and Horns > Hazard Warning Switch > Component Information > Testing and Inspection > Page 359
Hazard Warning Switch: Service and Repair
WARNING: ON VEHICLES EQUIPPED WITH AIRBAGS, REFER TO AIR BAGS AND SEAT BELTS/AIR BAGS SYSTEMS BEFORE
Steering Column Shrouds Remove/Install - Typical
5. Remove both the upper and lower shrouds from the steering column.
Multi-Function Switch Connector
8. Move the upper fixed column shroud to gain access to the rear of the multi-function switch.
10. Gently pull the switch away from the column. Loosen the connector screw. The screw will remain in the connector.
Multi-function switch connector screw = 2 N.m (17 in. lbs.)
Multi-function switch retaining screws = 2 N.m (17 in. lbs.)
Shroud to shroud = 0.3 to 0.8 N.m (3 to 7 in. lbs.)
Shroud to lower screw = 1.5 to 2.6 N.m (13 to 23 in. lbs.)
Tachometer mounting screws = 3.7 N.m (33 in. lbs.).
|[PREV PAGE] [NEXT PAGE]|