Workshop Repair Manuals

Plymouth Workshop Manuals

[PREV PAGE] [NEXT PAGE]

plymouth Workshop Repair Guides


Prowler V6-3.5L VIN G (1999)

Steering and Suspension > Suspension > Trailing Arm > Trailing Arm Bushing > Component Information > Service and Repair > Removal > Page 4282

Page 3
background image

raise the vehicle to the correct curb height at the top of the jounce cycle.

15. Jounce the front and rear of the vehicle several times to allow the vehicle to settle at its correct curb height.
16. Torque the shock absorber upper mounting bolt to 162 Nm (120 ft. lbs.).
17. Torque the shock absorber lower mounting bolt to 162 Nm (120 ft. lbs.).
18. Tighten the trailing link to frame bracket mounting bolt to a torque of 108 Nm (80 ft. lbs.).
19. Tighten the trailing link to knuckle mounting bolt to a torque of 163 Nm (120 ft. lbs.).

Steering and Suspension > Suspension > Trailing Arm > Trailing Arm Bushing > Component Information > Service and Repair > Removal > Page 4282

[PREV PAGE] [NEXT PAGE]