Prowler V6-3.5L VIN G (1999)
Transmission Speed Sensor: Service and Repair
The output speed sensor can be serviced without having to remove the transaxle from the vehicle.
CAUTION: When disconnecting speed sensor connector, be sure that the weather seal does not fall off or remain in old sensor.
NOTE: The output speed sensor is not interchangeable with the input speed sensor.
The output speed sensor is located on the left side of the transaxle case. The sensor threads into the transaxle case. Tighten output speed sensor to 20 -
34 Nm (180 - 300 inch lbs.).