Workshop Repair Manuals

Plymouth Workshop Manuals

[PREV PAGE] [NEXT PAGE]

plymouth Workshop Repair Guides


Prowler V6-3.5L VIN G (1999)

Transmission and Drivetrain > Drive/Propeller Shafts, Bearings and Joints > Drive/Propeller Shaft > Component Information > Service and Repair > Rear

Page 1
background image

Drive/Propeller Shaft: Service and Repair
Rear

REMOVAL

1. Disconnect battery negative cable.

Fig. 2

2. Disconnect transaxle cooler lines at transmission and plug lines.
3. Disconnect and remove transaxle cooler and bracket.

Fig. 3

4. Remove gearshift cable from manual valve lever.

Transmission and Drivetrain > Drive/Propeller Shafts, Bearings and Joints > Drive/Propeller Shaft > Component Information > Service and Repair > Rear

[PREV PAGE] [NEXT PAGE]