Prowler V6-3.5L VIN G (1999)
Power Window Circuit Breaker: Testing and Inspection
1. Locate the window circuit breaker in the Micro Relay Bank. Remove the circuit breaker and check for continuity from Cavity 2 to ground. If NO
continuity, repair circuit to switch as necessary
2. Pull the circuit breaker out slightly, but be sure that the terminals still contact the terminals in the Micro Relay Bank.
3. Connect the negative lead of a voltmeter to a good ground.
4. With the positive lead of the voltmeter, test each terminals of the circuit breaker for battery voltage.
5. If only one terminal has battery voltage, the circuit breaker is faulty and must be replaced. If neither terminal has battery voltage, repair the open
circuit between the Micro Relay Bank and the Power Distribution Center (PDC) as necessary.
