Workshop Repair Manuals

Plymouth Workshop Manuals

[PREV PAGE] [NEXT PAGE]

plymouth Workshop Repair Guides


Prowler V6-3.5L VIN G (1999)

Wiper and Washer Systems > Sensors and Switches - Wiper and Washer Systems > Wiper Switch > Component Information > Testing and Inspection

Page 1
background image

Wiper Switch: Testing and Inspection

Perform the diagnosis for the windshield wiper system and/or washer system as described before testing the multi-function switch.

WARNING:  ON VEHICLES EQUIPPED WITH AN AIR-BAG, REFER TO AIR BAGS AND SEAT BELTS/AIR BAGS SYSTEMS BEFORE
ATTEMPTING ANY STEERING WHEEL, STEERING COLUMN, OR INSTRUMENT PANEL COMPONENT DIAGNOSIS OR SERVICE.
FAILURE TO TAKE THE PROPER PRECAUTIONS COULD RESULT IN ACCIDENTAL AIRBAG DEPLOYMENT AND POSSIBLE
PERSONAL INJURY.

1. Open hood.
2. Disconnect and isolate the battery negative cable.
3. Unplug the multi-function switch wire harness connector.
4. Using an ohmmeter, perform the switch continuity checks at the switch terminals as shown in the Multi-Function Switch Continuity table.
5. If the switch fails any of the continuity checks, replace the faulty switch. If the switch is OK, repair the wiper system and/or washer system wire

harness circuits as required.

Wiper and Washer Systems > Sensors and Switches - Wiper and Washer Systems > Wiper Switch > Component Information > Testing and Inspection

[PREV PAGE] [NEXT PAGE]