Reliant-K L4-156 2.6L VIN G 2-bbl (1983)
![background image](/plymouth/reliant-k/l4-156_2.6l_vin_g_2-bbl/Page-445015.png)
Connect hose, PN 4307763, from the pressure regulator outlet (upper fitting) to the carburetor fuel inlet (Figure 4). Clamp with hose clamp, PN
6500650. Torque to 10 inch pounds.
FIGURE 7 - FUEL RESERVOIR & PRESSURE REGULATOR CONNECTIONS WITH FUEL FLOW SENSOR
Vehicles Equipped With Fuel Flow Sensor
Remove inlet nipple of fuel flow sensor and discard. Install new 30~ inlet nipple, PN 4307236, with nipple pointing to driver's side of car and
slightly downward (Figure 7).
Remove the fuel filter-to-fuel pump hose at the fuel filter and slide convolute sleeve, PN 4279993, over the fuel hose. Reattach the hose to the fuel filter
using the original hose clamp.