Reliant-K L4-156 2.6L VIN G 2-bbl (1983)
FIGURE 1 - TYPICAL CARBURETOR EXAMPLE
C.
Use a 1/4" diameter drill 8" long at the 11 o'clock position on the plug boss (Figure 1).
Plug should pop out when the drill bit contacts it.
D.
Run engine until full operating temperature is reached.
E.
Disconnect cooling fan and allow engine to idle for two minutes.
FIGURE 2 - IDLE SPEED ADJUSTMENT
Open the propane main valve. Slowly open the propane "Fine" control valve until maximum engine rpm is reached. With propane still flowing,
adjust the idle speed screw to get the specified propane rpm from specifications below (Figure 2):
PROPANE IDLE SPECIFICATIONS
Curb Idle RPM
Propane RPM
Federal &
800
850
California
Canada
800
875
F.
Turn off propane main valve and allow engine speed to stabilize. Slowly adjust the idle mixture screw to achieve the curb idle rpm specified
above (Figure 1).