Reliant L4-153 2.5L SOHC (1986)
Alignment: Technical Service Bulletins
Wheel Alignment - Specifications
Models
1985-1986 Domestic Front Wheel Drive
Subject
Front & Rear Wheel Alignment Specifications
Index
SUSPENSION
Date
December 8, 1986
No.
02-04-86
P-4423
The attached wheel alignment specifications should be used when aligning any 1985-1986 domestic front wheel drive vehicles.
Front wheel caster and rear wheel thrust angle have been added to assist you in performing wheel alignments.
NOTE:
FRONT WHEEL CASTER IS NOT ADJUSTABLE, NOR IS IT A
CRITICAL FACTOR IN NORMAL FRONT WHEEL DRIVE ALIGNMENT
SERVICE.
The specification is being published as a verification aid for you when repairing vehicles due to accident or other damage.
This bulletin supersedes all previously published wheel alignment specifications for 1985-1986 front wheel drive vehicles.
POLICY:
Information only
SPECIFICATIONS
Front Wheel Alignment
Acceptable Alignment Range
Preferred Setting
CASTER
**
Differential
within 1.5~
CAMBER - All Models
-0.2~ to + .80~ (-1/4~ to + 3/4~)
+ 0.3~ (+ 5/16~)
TOE
- All Models
Specified in Inches
7/32" IN to 1/8" OUT
1/16" IN +/- 1/16"
Specified in Degrees
.4~ IN to .2~ OUT
0.1~ IN +/- .1~
Rear Wheel Alignment
Acceptable Alignment Range
Preferred Setting
All Except "L"
CAMBER
-1.3~ to + 3~ (-1-1/4~ to + 1/4~)
-.5~ +/- .5~ (1/2~)
TOE*
Specified in Inches
5/16" OUT to 5/16" IN
0" +/- 1/8"
Specified in Degrees
0.60~ OUT to 0.60~ IN
0~ +/- .25~
"L"
CAMBER
-1.3~ to -.2~
-.75~ +/- .5~
TOE
.4~ OUT to .8~ IN
.20~ IN