Reliant L4-156 2.6L SOHC (1984)
Fig. 9 Adjusting fast idle speed. Mikuni carburetor
MIKUNI CARBURETOR
1.
Set parking brake and place transaxle in Neutral position.
2.
Turn off lights and accessories, then disconnect radiator fan electrical connector.
3.
Connect tachometer, then start engine and allow to reach normal operating temperature.
4.
Disconnect and plug vacuum hose from distributor.
5.
Open throttle and install tool No. C-4812 or equivalent on choke cam follower pin, Fig. 8.
6.
Release throttle lever and adjust fast idle speed to specifications, Fig. 9.
7.
Remove tool, then turn off engine, connect fan and vacuum hose and remove tachometer.