plymouth Workshop Repair Guides

Plymouth Workshop Service and Repair Manuals

Information Bus > < Coolant Temperature Sensor/Switch (For Computer)|Specifications
Page 1
background image

Idle Up Control Valve: Adjustments

Fig. 19 Throttle opener system. 1982-86 models except 1982 Champ & Colt (federal) w/1400cc engine & manual transaxle

1. Start engine and allow to reach normal operating temperature.
2. Ensure that all electrical accessories are "Off," then position transmission in "Neutral."
3. Set curb idle to specifications.
4. With air conditioning system "Off," disconnect vacuum hose from throttle opener nipple, then apply 20 inches Hg vacuum to throttle opener with a

suitable vacuum pump.

5. Adjust engine speed with throttle opener setting screw, Fig. 19, to the following specifications:

a. On Champ & Colt (1600cc engine), set engine speed to 900 ± 50 RPM for automatic transaxle equipped vehicles, or 850  ± 50 RPM for

manual transaxle equipped vehicles. 

b. On Challenger & Sapporo, set engine speed to 900 ± 50 RPM.

Information Bus > < Coolant Temperature Sensor/Switch (For Computer)|Specifications