plymouth Workshop Repair Guides

Plymouth Workshop Service and Repair Manuals

Automatic Temperature Control (ATC)|Page 3267 > < Air Door Actuator / Motor, HVAC|Description and Operation
Page 1
background image

Air Door Actuator / Motor: Service and Repair
Automatic Temperature Control (ATC)

1. Remove floor air distribution duct.
2. Locate and remove 2 actuator attaching screws.
3. Lower actuator from A/C heater housing and blend air door shaft.
4. Disconnect electrical connector lock, then the connector.
5. Reverse procedure to install.

Automatic Temperature Control (ATC)|Page 3267 > < Air Door Actuator / Motor, HVAC|Description and Operation