Sundance L4-135 2.2L SOHC (1987)
1
Authorized Modification Label
PN 4275086
Underhood MAP Sensor Kit - EFI, PN 4419401
Consisting of:
1
MAP Sensor
PN 5227491
1
Bracket
PN 5227493
2
Screws (sensor to bracket)
PN 152791
2
Nuts
PN 9419784
1
Screw (bracket to shock tower)
PN 6029513
1
Wiring Assembly
PN 4368706
1
Formed Vacuum Hose
PN 4201264
1
Logic Module Cover
PN 5213618
1
Terminal Insulator Assembly (black)
PN 4368173
3
Cable Tie
PN 6015756
1
Vacuum Connector (3/16" x 3/16")
PN 4104998
1
Vacuum Cap (3/16")
PN 3580171
1
Hose Routing Label (1985)
PN 4306842
1
Hose Routing Label (1986)
PN 4405706
Must be ordered separately:
1
Authorized Modification Label
PN 4275086
Repair Procedure
This procedure will eliminate the logic module mounted MAP sensor and install a MAP sensor in the engine compartment.
"K", "E", "G", "H" & "P" Body
1.
Remove right side kick panel and passenger side carpeting away from dash panel.
2.
Remove logic module and MAP sensor as an assembly.
3.
Remove and discard from logic module, vacuum hose for MAP sensor line.
4.
Remove and retain screws mounting MAP sensor.
5.
Disconnect MAP sensor from logic module and discard sensor.
6.
Connect wiring assembly, PN 4368706, to the logic module MAP sensor connector.
7.
Install logic module cover, PN 5213618, enclosing MAP sensor connector and seating grommet of wiring assembly, PN 4368706, in the cutout in
the side of the logic module.