Sundance L4-135 2.2L SOHC VIN D TBI (1992)
Window Track: Service and Repair
REAR GLASS RUN CHANNEL
1. Remove trim panel, watershield, and door glass.
2. Work the upper glass run channel from the glass opening by inserting a small screwdriver into the door frame, behind the channel. Catch each clip
with the screwdriver and carefully move it forward.
3. When the entire upper glass run channel has been separated from the glass opening, remove the lower fastener, and then the channel assembly.
4. Reverse this procedure to install using a piece of wood or plastic, measuring 3" x 2" x 1/4", as a tool for seating the channel in the door frame.
