Sundance L4-153 2.5L SOHC Turbo (1990)
Cruise Control Switch: Service and Repair
Fig. 91 Actuator Switch PULL Test
1. Disable airbag, refer to Air Bags and Seat Belts/Air Bags (Supplemental Restraint Systems)/Service and Repair.
2. Disconnect battery ground cable, and remove lower steering column cover.
3. Remove wiring harness retainer cover from under dashboard.
4. Disconnect speed control switch electrical connector from harness connector.
5. On models with tilt column, remove terminals from insulator using tool No. C-4135 or equivalent.
6. On all models, remove wiper control knob from end of lever.
7. Remove speed control switch to column attaching screws.
8. On models with tilt column, attach a flexible guide wire to lower end of speed control switch harness.
9. On models with standard column, remove upper steering column lock cover attaching screws, and cover.
10.
On all models, remove switch and harness from steering column.
11.
On models with tilt column, pull wires through lock housing between lock plate and side of housing.
12.
On all models, reverse procedure to install.
