Sundance Duster L4-153 2.5L SOHC VIN K TBI (1993)
Exhaust Manifold: Service and Repair
WARNING: Before servicing the fuel pump, fuel lines, fuel filter, throttle body or fuel injectors, the fuel system pressure must be released,
refer to Powertrain Management/Fuel Delivery and Air Induction/Service and Repair.
1.
Disconnect battery ground cable and drain coolant system.
2.
Remove air cleaner and disconnect all vacuum and fuel lines and electrical connectors from carburetor or throttle body.
3.
Disconnect throttle linkage, then remove power steering pump drive belt.
4.
Disconnect power brake vacuum hose from manifold, if equipped.
5.
Disconnect hoses from water crossover, then raise and support vehicle and disconnect exhaust pipe from exhaust manifold.
6.
Remove power steering pump and position aside. Remove intake manifold support bracket.
7.
Remove EGR tube and the intake manifold retaining screws.
8.
Lower vehicle and remove intake manifold.
9.
Remove exhaust manifold retaining nuts and exhaust manifold.
10.
Reverse procedure to install.
