Sundance Duster L4-153 2.5L VIN K FI (1992)
Cabin Temperature Sensor / Switch: Service and Repair
NOTE: The Sensor and Aspirator are wired together and must be replaced as an assembly.
REMOVAL AND INSTALLATION
ATC Computer Controls
1. Remove the instrument cluster assembly.
2. Un-snap the sensor from the instrument panel.
In-Car Temperature Sensor/Aspirator
3. Remove the two aspirator mounting screws.
4. Disconnect the aspirator intake hose from the instrument panel.
5. Remove sensor/aspirator and it's wiring harness from vehicle.
To install, reverse the preceding operation.