Sundance Duster L4-153 2.5L VIN K FI (1992)
Idle Speed/Throttle Actuator - Electronic: Service and Repair
Throttle Body View With Idle Air Control (IAC) Motor
Removal
1.
Disconnect negative battery cable.
2.
Remove air cleaner assembly.
3.
Disconnect motor wiring connector.
4.
Remove motor mounting screws (2-25 mm long, Torx head screws), and remove motor, (make sure the O-ring is removed from throttle body).
Idle Air Control (IAC) Motor Installation
Installation
Note:
If the pintle measures more than 1 in (25 mm), it must be retracted using scan tool [1].
1.
Install motor using a new O-ring, and torque mounting screws to 20 in-lbs (2 Nm).
2.
Connect motor wiring connector.
3.
Install air cleaner assembly.
4.
Connect negative battery cable.
Remarks
[1] Follow scan tool manufacturer's instructions.