Turismo L4-135 2.2L SOHC (1985)
FIGURE 9
13.
Type Authorized Modification Label, PN 4275086, as shown in Figure 9 with proper package part number and install next to or near the
original VECI label.
F.
After-Run Fan Removal (where equipped)
NOTE:
THIS PROCEDURE CANNOT BE USED ON 1984 MODELS WITH FACTORY INSTALLED AFTER-RUN FAN.
1.
Disconnect the 2-way plug for the ambient temp sensor that is located on the fan motor brace.
2.
Remove sensor from brace by severing tie wraps or removing screw and discard.
3.
Tape or tie wrap the after-run portion of the wire harness back to the main fan wire harness to assure the leads will not be caught in the fan.
4.
The fan may still after-run for only one engine shut-down cycle due to timer memory.
POLICY:
Reimbursable within the provisions of the warranty
TIME ALLOWANCE:
Labor Operation No.
14-70-11-94 . . . . . . . . . . .
2.5 Hrs.
FAILURE CODE:
AM - Authorized Modification
Parts List - 1981 - 83 & 1984 "L" Body - 2.2L Engine
PARTS LIST
1981 Through 1983 "L" BODY - 2.2L ENGINE
IN-TANK FUEL PUMP KIT
PACKAGE PART NO. 4364380
QTY. PART NAME
PART NO.
1
Control Module
5226640
14
Tie Wrap
6015756
1
Engine Compartment Harness
4304992*
1
Instrument Panel Harness
4304901
1
Wire Assembly - Electric Fuel Pump
4331826
1
13-1/2" long x 5/16" I.D. Hose
4279613
1
Fuel Pump Pad Cover
4275325