plymouth Workshop Repair Guides

Plymouth Workshop Service and Repair Manuals

All Other Service Bulletins for Idle Speed: > < Fuel System - Warm Idle Die Out|Page 1823
Page 19
background image

18.

Turn engine off and reinstall brown with white tracer wire into 6-way connector. Disconnect and reconnect battery connector.

19.

Reconnect radiator fan motor, coolant, and charge temperature sensors.

20.

Start engine and let speed stabilize for one minute.

21.

Engine speed should be within +/- 100 RPM's of specifications shown on the emission label.

22.

If idle speed adjustment was not required, remove logic module and replace with appropriate part:

PN 5227243 to be used for 1985 Turbo Manual PN 5227245 to be used for 1985 Turbo Automatic

The above logic modules may be used as a service part for all 1985 turbo vehicles.

POLICY:

Reimbursable within the provisions of the warranty

TIME ALLOWANCE:
Labor Operation No.

14-30-07-97

0.3 Hrs.

Check and Adjust Idle Speed

08-14-06-90

0.5 Hrs.

Check Idle Speed and Replace Logic Module

FAILURE CODE:

AM - Authorized Modification

All Other Service Bulletins for Idle Speed: > < Fuel System - Warm Idle Die Out|Page 1823