Turismo L4-135 2.2L SOHC (1985)
Stabilizer Bar: Service and Repair
Fig. 15 Sway bar assembly. Except models with ``D'' shaped insulators
Fig. 16 Sway bar assembly. 1982---83. (1984---88 similar)
REMOVAL
1. Raise and support front of vehicle.
2. On except models with "D" shaped insulators, remove end bushing to control arm nut and reinforcement plateshown, On models with "D" shaped
insulators, remove nuts, bolts and retainer at control armshown,
3. On except models with "D" shaped insulators, remove sway bar to crossmember linkage (nut, retainer and insulators at top of crossmember).
Bushing are permanently installed on sway bars. On models with "D" shaped insulators, remove bolts at crossmember clamps, then remove
clamps.
4. Remove sway bar.
INSTALLATION