Voyager L4-153 2.5L SOHC (1990)
Radiator Cooling Fan Motor: Service and Repair
There are no repairs to be made to the fan. If the fan is cracked, warped or otherwise damaged, it must be replaced as an assembly.
1.
Disconnect battery ground cable and electrical connector from fan motor.
2.
Remove shroud clips if equipped and support bolts, nuts and washers.
3.
Remove fan, motor and shroud or support as an assembly from radiator support.
4.
Remove fan from motor shaft by supporting assembly on bench, remove retaining clip and sliding fan away.
5.
Reverse procedure to install.