Voyager L4-153 2.5L SOHC (1990)
Auxiliary Shaft: Service and Repair
Intermediate Shaft Bushing
Intermediate Shaft Specifications
Intermediate Shaft Bushing, Front
1. Remove front bushing using Special Tool C-4697-2 with Special Tool Handle C-4171.
2. Install front bushing using Special Tool C-4697-1 and Special Tool Handle C-4171 until tool is flush with block.
Intermediate Shaft Bushing, Rear
3. Remove rear bushing using Special Tool C-4686-2 and Special Tool Handle C-4171.
4. Install rear bushing using Special Tool C-4686-1 and Special Tool Handle C-4171 until tool is flush with block.