Voyager L4-153 2.5L SOHC Turbo (1989)
Removing Or Installing Inboard Shoe Assembly
7. Remove the outboard shoe assembly.
Fig 2 Marking Brake Disc And Wheel Stud For Reassembly
8. Mark disc and stud for assembly.
9. Remove braking disc from drive flange studs.
10. Remove the inboard shoe assembly.
Installation
For additional information see Installation Notes. See: Brake Caliper/Fundamentals and Basics
Single Pin Disc Brake Caliper
1. Push piston back into cylinder bore with uniform pressure until it is bottomed.