Voyager L4-156 2.6L SOHC (1984)
![background image](/plymouth/voyager/l4-156_2.6l_sohc/Page-171002.png)
Fig. 13 Installing hub into knuckle
Installation
1. Press new bearing into knuckle using tool No. C-4811.
2. Install bearing retainer. Torque retainer attaching screws to 20 ft. lbs.
3. Press hub into bearing using tool No. C-4811.
4. Position new seal in recess, then install using tool No. C-4698 or equivalent.
5. Install steering knuckle as described under "Steering Knuckle, Replace."