Voyager V6-229 3.8L (1996)
15. Install left quarter trim bolster.
16. Install front door sill plate.
17. If equipped, install second rear seat.
18. Install first rear seat.
19. Connect the negative cable clamp to the battery post.
Liftgate CHMSL Access Panel
CHMSL Access Panel
REMOVAL
1. Using a trim stick (C-4755), Disengage clips holding CHMSL access panel to liftgate trim panel.
2. Separate access panel from vehicle.
INSTALLATION
1. Place access panel in position on vehicle.
2. Engage clips to hold CHMSL access panel to liftgate trim panel.
Liftgate Sill Plate
Liftgate Sill Plate
REMOVAL
1. Disengage hidden clips holding sill plate to liftgate door opening sill.
2. Separate sill plate from vehicle.
INSTALLATION
1. Place sill plate in position on vehicle.
2. Align locator rib into recess in liftgate sill.
3. Engage hidden clips to hold sill plate to liftgate door opening sill.
Liftgate Trim Panel