Voyager V6-229 3.8L (1996)
NOTE:
INSURE ALL (3) INSPECTION AND ADJUSTMENT PLUGS (p/n 04238721) ARE PRESENT IN THE BACKING PLATE AND THE WHEEL
CYLINDER IS SEALED TO THE BACKING PLATE WITH RTV (pin 04318025).
8.
Wipe any spilled fluid from the outside of the wheel cylinder, as well as any other brake parts including linings.
9.
Repeat step 2 through 8 for other brake assembly.
10.
Install the brake drums, rear wheels and lower the vehicle.
POLICY: Reimbursable within the provisions of the warranty.
TIME ALLOWANCE:
Labor Operation No:
05-90-50-94
1.0 Hrs.
FAILURE CODE: XX - Service Adjustment