Voyager V6-229 3.8L (1996)
2.
Inspect both of the fuel rail crossover tube joints (Figure 1)
3.
>
If there are signs of fuel leakage from either of the fuel rail crossover tube joints, the fuel rail assembly must be replaced. Continue with
Section C - Replace Fuel Rail Assembly.
>
If there are signs of RED rust near either of the fuel rail crossover tube joints, the fuel rail assembly must be replaced. Continue with Section C
- Replace Fuel Rail Assembly.
If there are NO indications of fuel leakage OR RED rust near either of the fuel rail crossover tube joints, continue with Section B - Install Fuel
Rail Seals.
B. Install Fuel Rail Seals
1.
If the engine is equipped with an intake manifold cover (1996 and early-1997 3.8L engines only), remove the cover and set it aside.