Voyager V6-3.0L VIN 3 (1998)
Drive Belt: Service and Repair
Removal and Installation
A/C Belt
GENERATOR/POWER STEERING PUMP BELT REMOVAL/INSTALLATION
Release Belt Tensioner
The Poly-V generator/power steering pump belt is provided with a dynamic tensioner to maintain proper belt tension. To remove or install this belt,
apply force in a clockwise direction to the tensioner pulley bolt.
AIR CONDITIONING BELT REMOVAL
Air Conditioning Drive Belt 3.0L Engine
To remove the air conditioning compressor drive belt, first loosen the idler pulley lock nut, then turn the adjusting screw to lower the idler pulley.
AIR CONDITIONING BELT INSTALLATION/ADJUSTMENT
To adjust the air conditioning drive belt, loosen the idler pulley lock nut and adjust belt tension by tightening adjusting screw. Refer to
Proper Belt Tension and Belt Tension Chart. Tighten pulley lock nut to 54 Nm (40 ft. lbs.) after adjustment.
Accessory Drive Belt
