6000 V6-191 3.1L (1989)
8. Plug openings in caliper housing (10) and inlet fitting (11) to prevent fluid loss and contamination.
CAUTION: Do not crimp brake hose, as this may damage internal structure.
9. Remove caliper mounting bolts and sleeves (1).
10. Remove caliper (10) from rotor and caliper mounting bracket (12).
^
If the caliper assembly is not being removed from the vehicle for unit repair, suspend the caliper with a wire hook from the strut. Refer to
image.
11, Inspect Caliper
^
Mounting bolts and sleeves (1) for corrosion.
^
Bushings (2) for cuts or nicks.
^
If damage to either part is found, replace with new parts when installing caliper.
Caliper Overhaul
1. Remove caliper completely from vehicle
2. Clean outside of caliper, then drain brake fluid from caliper.
WARNING: Do not place fingers in front of piston for any reason when applying compressed air. This could result in serious personal
injury.
Fig. 6 Applying Compressed Air To Caliper Line Port
Disc Brake Caliper Assembly
