6000 V6-191 3.1L (1989)
Compact Master Cylinder Assembly
ASSEMBLY
NOTE: Lubricate all rubber parts with clean brake fluid prior to installation.
1. Install lubricated secondary seal (16), primary seal (14) and spring retainer (13) onto secondary piston (15).
2. Install secondary piston spring (12) and secondary piston assembly (13 through 16) into cylinder bore.
3. Install lubricated primary piston (17) into cylinder bore.
4. Install piston retainer (18) while depressing primary piston (17).
5. Install proportioner valve assemblies (2 through 6) and fluid level sensor (1).
INSTALLATION OF PROPORTIONER VALVE