6000 V6-191 3.1L (1989)
Master Cylinder Power Unit Assembly
1. Install hydraulic unit to the pushrod bracket.
2. Install two hydraulic unit mounting bolts to the pushrod bracket.
^
Tighten hydraulic unit mounting bolts to 50 Nm (37 lbs. ft.).
3. Install rear half of the pushrod to the front half.
^
Thread the two halves together.
^
Reposition the dust boot.
4. Install pushrod to the brake pedal.
^
Tighten pushrod to brake pedal nut to 37 Nm (27 lbs. ft.).
5. Install four brake pipes to the valve block and hydraulic unit.