pontiac Workshop Repair Guides

Pontiac Workshop Service and Repair Manuals

Engine - Stalls on Reverse/Drive Engagement|Page 2179 > < Engine - Stalls on Reverse/Drive Engagement
Page 2
background image

FIGURE 2 - THM 125/125C TRANSAXLE IDENTIFICATION INFORMATION

DATE OF PRODUCTION CHANGE:

(Figure 2)

Beginning June 9, 1987 (Julian date 160) all 1987 THM 125C Transaxles were produced with the new solenoid.
IMPORTANT:

Some vehicles equipped with THM 125C transaxles built between February 15th and February 25th, 1987 (Julian dates 049 - 056) may have suspect
Torque Converter Clutch (TCC) solenoids. The suspect previously equipped solenoids, may stay applied after transaxle has been operated at normal
operating temperatures. This condition could result in engine stall while engaging reverse or drive range.

FIGURE 3 - REMOVING SOLENOID

SERVICE ACTION: (Figure 3)

The new Solenoid can be used to service all past THM 125C Transaxle models. Remove the side cover and replace the solenoid and conduit assembly

Engine - Stalls on Reverse/Drive Engagement|Page 2179 > < Engine - Stalls on Reverse/Drive Engagement