Aztek AWD V6-3.4L VIN E (2004)
3. Install the push pins to the upper quarter trim.
4. Install the rear seat belt guide loop to the rear upper quarter trim panel. Refer to Seat Belt Retractor Replacement - Rear in Seat Belts.
5. Install the upper quarter screw.
6. Install the rear roof garnish molding. Refer to Garnish Molding Replacement - Rear Upper (See: Garnish Molding Replacement - Rear Upper) .
Trim Panel Replacement - Rear Quarter Upper (Rendezvous)
Trim Panel Replacement - Rear Quarter Upper (Rendezvous)
Removal Procedure
1. Remove the rear seat belt guide loop from the rear upper quarter trim panel. Refer to Seat Belt Retractor Replacement - Rear in Seat Belts.
2. Remove the trim panel from the inner panel, by pulling the panel to release the push-in retainers.
3. Remove the trim panel from the vehicle.