Aztek AWD V6-3.4L VIN E (2004)
6. Install the J-hook retainer on the rear of the cover.
7. Install the hook and the loop retainers securing the cover to the cushion, by pressing in place until fully seated.
8. Install the seat adjuster.
9. Connect the electrical connector for the heated seat, if equipped.
10. Install the seat back.
11. Install the bucket seat.
Seat Cushion Replacement - Front
SEAT CUSHION REPLACEMENT - FRONT (AZTEK)
REMOVAL PROCEDURE
1. Remove the front bucket seat from the vehicle.
2. Remove the front seat back.
3. Remove the front seat cushion cover from the front seat cushion.