Aztek AWD V6-3.4L VIN E (2004)
8. Use the J37043 in order to remove the park brake cable from the backing plate.
Installation Procedure
1. Install the park brake cable to the backing plate.
2. Install the park brake cable to the park brake actuator.
3. Install the park brake left side cable to the park brake equalizer.
4. Adjust the park brake cable.
5. Install the brake drum.
6. Install the tire and wheel.
7. Lower the vehicle.
Disc
Park Brake Cable Replacement - Right Rear (Disc)
Removal Procedure
Caution: Refer to Brake Dust Caution in Service Precautions.
1. Release the park brake.
2. Raise and support the vehicle.